B&G Precision Inc.

Certifications

INSPECTION REPORT:

B&G custom inspection report is compliant with AS9101 and AS9102 requirements.
It includes statistical data analysis function and is:  1 capable to track critical dimensions  2 calculate CPK values  3 establish a Six Sigma reading

4 chart tool wear  5 create control limits  6 reference calibration data and  7 establish measurement and monitoring methods


B&G's inspection report is more than a first article report, it is designed as a communication tool between the customer and B&G. It analyses and charts current manufacturing capabilities in relation to applied measurement and monitoring methods. 

INSPECTION REPORT

PAGE 1:

Outlines general project information, applied AQL levels and shows the relationship of critical dimensions and applied manufacturing methods. The result is contrasted over a Six Sigma chart and individual results are measured in CPK.

What is Cpk?

Estimates what the process is capable of producing, considering that the process mean may not be centered between the specification limits.

Page 1

Cover Page

PAGE 2:

Part number accountability is a page used only for assemblies. 

Page 2

Part Number Accountability

Page 3

Product Accountability

PAGE 3

Product accountability is used to track the raw material used to manufacture the product and all other processes and aspects that come in contact with the product and whose adverse affect could have a negative affect on the finished product.

PAGE 4 and 5

Statistical Process Control (SPC) Date Sheet is used to collect in process inspection data for key product characteristics. This data are used in page 5 to show actual data within control limits. Items reverenced include: 1 AQL level   2 Measurement and Monitoring Method   3 Actual Measurement   4 Cp and Cpk reading

Page 4

SPC Data Sheet

Page 5

SPC Chart

Page 6

First Article Inspection Report

PAGE 6

First Article Inspection Report is used to validate every measurable item listed on the customer drawing and become the acceptance record for the applicable product.

The FAIR is listing:  1 Item Number (balloon number)  2 Feature Description  3 SPC Item  4 Dimension  5 Upper Specification Limit  6 Lower Specification Limit  

Actual Measured Dimension  7 Asset Number (identification for inspection equipment used and reverence to calibration master list)

8 Acceptance Authority Media (signature authorization of authorized inspector)

B&G Precision Inc.

B&G PRECISION INC.   45450 Industrial Place, Fremont, CA 94538   Main (510) 438-9785   Fax (510) 438 0975

QUALITY RELATED QUESTIONS:

Phone (510) 438-9785; Fax (510) 438-8975;

e-mail Quality@BGprecisioninc.com

REQUEST FOR QUOTES:

Phone (510) 438-9785; Fax (510) 438-8975; e-mail Quotes@BGprecisioninc.com

B&G Precision Inc.

Copyright © 2013-2014 B&G Precision, INC. All rights reserved